Sync from remote server: 2025-10-12 18:56:41

Tilt/Parametri_Installazione.m

@@ -0,0 +1,169 @@
+%% Funzione che definisce i parametri specifici di elaborazione
+
+function [MEMS,biax,triax,struct,tolleranzaAcc,tolleranzaMag,segnoNS,...
+    segnoEO,Ndevst,Wdevst,segnoNS_HR,segnoEO_HR,Ndevst_HR,Wdevst_HR,allineato,...
+    NdatiMedia,NdatiMediaP,Ndatidespike,Anchor_real,Tmax,Tmin,Corr_Azimuth,Traversine,...
+    base,altezza,larghezza] = ...
+    Parametri_Installazione(unitID,idTool,DTcatena,yesTL,yesTLHR,yesTLH,yesTLHRH,yesPL,...
+    yesThL,yesKL,yesKLHR,yesPT100,yesIPL,yesIPLHR,yesWL,yesHD,yesHDVR,conn,FileName)
+
+text = 'Parametri_Installazione function started';
+fileID = fopen(FileName,'a');
+fmt = '%s \r';
+fprintf(fileID,fmt,text);
+
+comando = ['select avg, despike from software where tool_id like ''' idTool ''' '];
+Dati = fetch(conn,comando);
+
+NdatiMedia = cell2mat(Dati(1));
+Ndatidespike = cell2mat(Dati(2));
+
+%% MEMS
+if yesTL == 1 || yesTLH == 1 || yesKL == 1 || yesIPL == 1 || yesHD == 1 || yesHDVR == 1
+   comando = ['select mems, toll_Acc, num_Ds, win_Ds from software where tool_id like ''' idTool ''' '];
+   Dati = fetch(conn,comando);
+   MEMS = cell2mat(Dati(1)); 
+   tolleranzaAcc = cell2mat(Dati(2)); 
+   Ndevst = cell2mat(Dati(3)); 
+   Wdevst = cell2mat(Dati(4)); 
+   if yesTL == 1 || yesIPL == 1
+       comando = ['select elab, toll_Mag, ns_Sign, eo_Sign from software where tool_id like ''' idTool ''' '];
+       Dati = fetch(conn,comando);
+       elab = cell2mat(Dati(1));
+       if elab == 1
+           triax = 1;
+           biax = 0;
+           struct = 0;
+       elseif elab == 2
+           triax = 0;
+           biax = 1;
+           struct = 0;
+       elseif elab == 3
+           triax = 0;
+           biax = 0;
+           struct = 1;
+       end
+       tolleranzaMag = cell2mat(Dati(2)); 
+       segnoNS = cell2mat(Dati(3)); 
+       segnoEO = cell2mat(Dati(4));
+   elseif yesHD == 1 || yesHDVR == 1
+       comando = ['select toll_Mag from software where tool_id like ''' idTool ''' '];
+       Dati = fetch(conn,comando);
+       tolleranzaMag = cell2mat(Dati(1));
+       segnoNS = [];
+       segnoEO = [];
+       triax = [];
+       biax = [];
+       struct = [];
+   else
+       segnoNS = [];
+       segnoEO = [];
+       triax = [];
+       biax = [];
+       struct = [];
+       tolleranzaMag = [];
+   end
+else
+    MEMS = [];
+    tolleranzaAcc = [];
+    tolleranzaMag = [];
+    Ndevst = [];
+    Wdevst = [];
+    triax = [];
+    biax = [];
+    struct = [];
+    segnoNS = [];
+    segnoEO = [];
+end
+       
+%% Elettrolitici   
+if yesTLHR == 1 || yesTLHRH == 1 || yesIPLHR == 1
+    comando = ['select num_Ds_HR, win_Ds_HR, align from software where tool_id like ''' idTool ''' '];
+    Dati = fetch(conn,comando);
+    Ndevst_HR = cell2mat(Dati(1));
+    Wdevst_HR = cell2mat(Dati(2));
+    allineato = cell2mat(Dati(3));
+    if yesTLHR == 1 || yesTLHRH == 1
+        comando = ['select ns_Sign_HR, eo_Sign_HR, align from software where tool_id like ''' idTool ''' '];
+        Dati = fetch(conn,comando);
+        segnoNS_HR = cell2mat(Dati(1));
+        segnoEO_HR = cell2mat(Dati(2));
+        allineato = cell2mat(Dati(3));
+    else
+        segnoNS_HR = [];
+        segnoEO_HR = [];
+    end
+else
+   segnoNS_HR = [];
+   segnoEO_HR = [];
+   Ndevst_HR = [];
+   Wdevst_HR = [];
+   allineato = [];
+end
+
+%% Termometri
+if yesTL == 1 || yesTLH == 1 || yesKL == 1 || yesIPL == 1 || yesTLHR == 1 || ...
+        yesTLHRH == 1 || yesIPLHR == 1 || yesKLHR == 1 || yesThL == 1 || yesPT100 == 1 || ...
+        yesWL == 1 || yesHD == 1 || yesHDVR == 1
+    comando = ['select max_temp, min_temp from software where tool_id like ''' idTool ''' '];
+    Dati = fetch(conn,comando);
+    Tmax = cell2mat(Dati(1));
+    Tmin = cell2mat(Dati(2));
+else
+    Tmax = [];
+    Tmin = [];
+end
+
+if yesIPL == 1 || yesIPLHR == 1 || yesHD == 1 || yesHDVR == 1
+   comando = ['select azimut_guida_a from software where tool_id like ''' idTool ''' '];
+    Dati = fetch(conn,comando);
+    Corr_Azimuth = cell2mat(Dati(1));
+else
+    Corr_Azimuth = [];
+end
+
+%% Piezo Link
+if yesPL == 1
+    comando = ['select avg_piezo from software where tool_id like ''' idTool ''' '];
+    Dati = fetch(conn,comando);
+    NdatiMediaP = cell2mat(Dati(1));
+else
+    NdatiMediaP = [];
+end
+
+%% Weir Link
+if yesWL == 1
+    comando = ['select base, altezza, larghezza from software where tool_id like ''' idTool ''' '];
+    Dati = fetch(conn,comando);
+    base = cell2mat(Dati(1));
+    altezza = cell2mat(Dati(1));
+    larghezza = cell2mat(Dati(1));
+else
+    base = [];
+    altezza = [];
+    larghezza = [];
+end
+   
+%% Calcolo sghembo binari
+if yesTLH == 1
+    comando = ['select rail_width from software where tool_id like ''' idTool ''' '];
+    Dati = fetch(conn,comando);
+    Traversine = cell2mat(Dati(1));
+else
+    Traversine = [];
+end
+
+%% Seleziono profondità "reale" dell'ancora
+comando = ['select anchor_real from tools where unit_id like ''' ...
+       unitID ''' and name like ''' DTcatena ''' '];
+curs = exec(conn,comando);
+curs = fetch(curs);
+Anchor_real = cell2mat(curs.Data);
+if ischar(Anchor_real) == 1
+    Anchor_real = 0;
+end
+
+text = 'Chain parameters defined correctly. Parametri_Installazione function closed';
+fprintf(fileID,fmt,text);
+fclose(fileID);
+end